12v to 12v “noise filter”
Does anyone have any familiarity with a same voltage dc to dc device that would make for a more stable power supply on the output side. Most notable for us is the lights flicker when the sureflow water pump is running. My thought is that a filtered even power would be less hard on devices. I have read where folks who are stepping down from 24 volts to 12 using the Victron Orion step down converter have found a cleaner power supply. Lights not flickering etc. Thoughts, ides?
Not really answering the question
but as a side note I have LED lights that are regulated 8-30 volts so they don't flicker like incandescent or cheaper non-regulated LEDs
ok, maybe better led lamps would help. The other time it can be quite annoying is when we are running the electric oven through the inverter. It is a quality PSW inverter but as it cycles the elements off and on the lights have a shallow flicker. The oven draws about 1500 watts but it is unlike other high load items we use like the hot water heater. I will check your channel for the regulated lamps you installed. Thanks!
Mine are Starlights had them 5 years now and no failures, expensive, though -
I've heard good things about M4 LEDs -
Cool thanks, after dinner we will watch this and the video you posted earlier about where you are camped.
I have led lights that interfere with my tv signal
Sign in or register to add a comment.
Add a Comment
Welcome to the LYRV Forum
Click for Invite Information
Ask For Help
Tales From the Road
RV Park Reviews
RV Tips & Tricks
Mods, Repairs & Upgrades
RV Product Reviews
Hiding Various Dash Accessory 12V Power Wires
Neglected RV Water Heater Flush + Clearsource Filter Update
Battery Isolator Cut Off Switch 24v 12v
New Clearsource Ultra (3 Stage) RV Water Filter
Support the Forum
Terms of Service
Created with PlushForums
© 2020 Love Your RV! Forum