• Jay Pat
    6
    I have a surburban heater.
    Twice now, it has stopped working on 120v.
    Both times I have cleaned wire connectors ends by disconnecting and re connecting the wires at the terminals, several times.
    If you have this problem, look for the four wires with connectors.
    Pat
  • Ray
    726
    Thanks for the tip. Another notorious failure point is the electrical on/off switch. I had one where the connector terminals must have oxidized leading to poor connections and made the switch overheat melting the plastic switch a bit. Froze the switch.
  • Jay Pat
    6
    My switch froze, too.
    I got the switch loose, but it wouldn't come out.
    Someone showed me how to pull switch out a little.
    Tilt top of switch towards me and lift up and pull all the way out.
    I extend the wires to the switch and remounted the switch inside the rv..
    Much better.
  • Alpenliter
    4
    I did the same mod Jay. Much easier to access. I would suggest anyone removing the switch to kill the power first.
bold
italic
underline
strike
code
quote
ulist
image
url
mention
reveal
youtube
tweet
Add a Comment