• Tuxedoville
    6
    We replaced our LaCrosse Weather station at home with a newer one & have set the old one up on our Class C Spirit, which works great. (No wind speed, so just zapped strapped the sensor underneath a roof ladder rung. But how can we secure the display unit on the thin interior wall? The unit has one "keyhole" on the back for a screwhead. Of course, a plain screw, even with an anchor, doesn’t hold on the thin wall. I know there’s a solution, but need someone to point me in the right direction.
  • Greg F
    274
    My wife is the queen of command strips for all kinds of things but for flat mounting velcro is my go to.

    velcro
  • Ray
    672
    I've actually found screws don't hold too bad on our thin wallboard as long as I don't over tighten to the point they lose their bite.
    Added this shelf years ago and it's still there! https://www.loveyourrv.com/extra-rv-shelving-mod-towels-linens/ and my weather station display is hung on screws, but it has two.
    For things, I don't need to remove easily I use 3M outside mounting tape - https://www.loveyourrv.com/attaching-decor-rv-walls-without-screws/
    Another option is Well-Nuts
  • RVsolar
    335
    Picked up a roll of Nano tape seems to work quite well and it is reusable.
  • TerryMac
    14
    I have had great luck with the Velcro type command strips. I prefer the newer type Velcro which has sort of a mushroom shaped (pin head) attachment on BOTH strips. I think they call them picture hangers.

    The display should be easily in their weight range.

    One thing on command strips is that they will stick to the cheap RV wallpaper better than the wallpaper will stick to the actual wall. I had a hook holding a small cutting board to my kitchen wall. One time I went to use it and noticed it was swinging on a large bubble of wallpaper. I had to carefully remove the command strip, slice the wallpaper bubble, and add glue under the wallpaper to get it to lay back down.

    FYI
  • Tuxedoville
    6
    Hey, everybody! Thanks for the suggestions which led me to decide using a Hollow Door Anchor & it worked like a charm. I made a small wooden wedge for the back so the weather station stays firmly in place while underway.
    (On a related note, The picture above is a little box frame from a Dollar Store. I put a pic I like in, (It’s actually a napkin....coolest ever!), then jerry-rigged it to easily remove & fit perfectly over the display before bed. Even at its lowest setting, the light from the display annoyingly flooded the whole rig. Problem solved!)

    ACtC-3c-Z0vAGLrVItpzLEORLPngYnKUXW5h0wwPIu2A7MjEPvWTd8qt3GRF7E7I96OTo07uKMKYk2uMhhWXLYbbGDeETdk5gkLZ8w6Uj0fmWNerltKwxoSUizPsOrCjNcwgzNbZz1Qs4y23wvlPvpz2uEg1Pw=s937-no?authuser=0
bold
italic
underline
strike
code
quote
ulist
image
url
mention
reveal
youtube
tweet
Add a Comment