New RV Awning Fabric Installation
In this video, I remove my Keystone Cougar fifth-wheel trailers original 10-year-old and badly worn Dometic 9100 power awning vinyl material. I replace it with a new Solera universal fit replacement from Lippert Components. See the Solera Universal Awning Fabric Color and Size Options on the LCI Store -
Rather than removing the complete awning hardware, including the support arms, I decided to just take off the roller tube. To do that, I first unrolled the awning about a foot or so and put a cotter pin in the torsion spring to keep it from unwinding violently. Then I restrained the spring-loaded support arms with zip ties.
DANGER! Failing to properly restrain the support arms and roller tube torsion spring can result in injury or death. These items are spring-loaded. Read the manuals for your particular awning make and model and follow the recommended disassembly procedures.
Next, I cut away the old awning material and removed the two bolts holding the roller tube to the support arms. Once on the ground, I was able to easily replace the old material with the new Solera awning fabric. To do this, I needed to unwind the torsion spring with a pair of vise-grips and drill out the rivets holding the end caps.
Once the new material was rolled on the awning tube, I riveted the end caps back in place and rewound the torsion spring, restaining it once again with the cotter pin.
Finally, with the help of a couple RVer friends, we carefully guided the new awning material back into the awning top rail channel on the RV sidewall. To protect the thin vinyl material from any damage, I used some pool noodles and tape on any sharp hardware edges. I also sprayed silicone lube into the channel to make sliding in the end cord bead easier. We utilized a pair of ladders and my truck's 8-foot bed as make-do scaffolding slowly moving it along.
After a few minor set screw adjustments to make sure the awning material was centered on the roller tube and the RV sidewall channel, it was ready to use. Everything went relatively smoothly, and I'm happy with the brand new looking awning!
Awning Related Posts and Videos -
View many other of my Lippert Components (LCI) product installs and reviews -
Cool video. 10 years is a long time, especially for your full time use. I do agree that it seems odd not to have a hemmed seem along the edges for added tear resistance.
They don't make stuff like they use too. The material on my RV is not as nice as the older material. I suspect it won't last as long I suspect.
Sign in or register to add a comment.
Add a Comment
Welcome to the LYRV Forum
Click for Invite Information
Ask For Help
Tales From the Road
RV Park Reviews
RV Tips & Tricks
Mods, Repairs & Upgrades
RV Product Reviews
Solera RV Awning Screen Room Installation
RV Power Awning Repair - faulty wire crimp
2021-22 RV Snowbird Season Travel Recap - Route, Stops and Costs
Plumbing a Mr. Heater Big Buddy Heater into your RV propane system
Support the Forum
Terms of Service
Created with PlushForums
© 2022 Love Your RV! Forum