Go Power Solar
I have a Go Power system in my Titanium. It's 2 solar panels and 4 x 6V batteries connected series parallel. I have a 1500W true sine wave inverter. Overall I haven't really tested the system with boon docking but I would like to. Looking at the setup and electrical connections the installer used a lot of wire nuts electrical tape and varying cable sizes. It functions but is kind of a mess. My plan is to make a pv combiner box out of an electrical sub panel. Tie the two buses together with some 6AWG that should provide 55 Amps for the wire from the panels in the sub panel put a double 15A breaker one for each panel on the roof. This gives me the ability to isolate the panels.Then build a junction box to have a nice clean area to run to solar controller which is a PWM type from Go Power, inverter and battery cables . Definitely add a battery shutdown switch. I .want some more protection for the system as well
Sign in or register to add a comment.
Add a Comment
Welcome to the LYRV Forum
Click for Invite Information
Ask For Help
Tales From the Road
RV Park Reviews
RV Tips & Tricks
Mods, Repairs & Upgrades
RV Product Reviews
Solar Generator to power RV, should I add a Battery Power Cut Master Switch so the... ??
Remote Solar Power Disconnect Switch Installation
What Do We Power With 500 Watts of RV Solar?
"Solar power on the "Mobile Homestead"!
Boondocking Power Upgrade - Adding Separate 500W Solar Ground Panel Array
Support the Forum
Terms of Service
Created with PlushForums
© 2023 Love Your RV! Forum