RV Power Awning Repair - faulty wire crimp
In this video, I locate and repair an intermittent connection in my Dometic 9100 RV power awning 12VDC supply wiring. The wireless remote worked fine; however, the manual switch most times wouldn’t move the awning. Only a faint clicking could be heard. So, I removed the control panel and had a look at the switch and wiring feeding it.
Using a multimeter, I discovered a wire crimp connector had become flakey, causing the intervention operation. To repair, I cut out the OEM crimps and installed new butt connector style crimps. Awning functions returned to normal. During the repair, I also explain how the reversible awning switch works.
Nice fix Ray, thanks for sharing!
Rush and Lola
Loose connections, they do present issues at times. Thanks Ray for the reminder.
Rush and Lola
I would surmise there is a master power supply to the awning from the remote via relays. It would be interesting to see the wiring diagrams for the set up.
We have an "Pro Plus iN Command" system that runs our awnings, jacks, some lights, etc. It doesn't keep me up at night worrying if it will fail, but if it does, it will make life interesting, to say the least!
I'd rather have switches for back ups to the system.
Yes, here is my fifth wheels main control unit. The toughest part is knowing where the heck they have run the wiring, In the event of a failure of a buried wire, likely easier to just run a fresh one.
Sign in or register to add a comment.
Add a Comment
Welcome to the LYRV Forum
Click for Invite Information
Ask For Help
Tales From the Road
RV Park Reviews
RV Tips & Tricks
Mods, Repairs & Upgrades
RV Product Reviews
Replacing Faulty RV City Water Connection - Weeping Check Valve
Plumbing a Mr. Heater Big Buddy Heater into your RV propane system
Footage from the Estuary below our RV Site – Thunderbird RV Park, BC
Repairing Busted Plastic RV Shower Fixture
Support the Forum
Terms of Service
Created with PlushForums
© 2020 Love Your RV! Forum